Mold Max™ Fast Cat™ 30 Gouges "U" Sizes: Coated diameters are nominal

Sizes: Coated diameters are nominal and may vary in size by

Full physical properties are attained after 24 hours cure at room temperature

0 and shade 5

Add 407 Low Density or 410 Microlight filler to mixed epoxy

This piece is approximately 17x18" at its widest and around 22lbs

Mold Max™ Fast Cat™ 30 Gouges "U" Sizes: Coated diameters are nominalFast Cat 30 silicone rubber catalyst will accelerate the cure time of Mold Max 30 silicone rubber. Used in place of (or in combination with) Mold Max 30 regular Part B catalyst, Fast Cat 30 will reduce the demold time from overnight to as little as 30 minutes. Instructions Fast Cat 30 is for Mold Max 30 silicone ONLY. Safety Use in a properly ventilated area (room size ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize