1-1/2 NPT HSS Pipe Tap, Qualtech Quantity:1 Part Number DMS04-9002

Part Number DMS04-9002

Part Number: M16C1000ROD46Z

Part Number: VibraTite2385ft

Part Number DWTST13/16-18P

resulting in a higher performing tool than one-piece designs • Permanent Connection – The bit is pressed directly into the socket for a permanent connection that won't loosen over time or under stress • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types • Socket Rail – The twist-to-lock clips on the rail hold sockets securely and can be repositioned anywhere along the rail

1-1/2 NPT HSS Pipe Tap, Qualtech Quantity:1 Part Number DMS04-9002Product Description Also called pipe taps, HSS NPT pipe taps are designed to clean and or re thread damaged or jammed pipe threads. They are appropriate for threading a wide variety of materials both ferrous and nonferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3 4 of an inch per foot. All Pipe Taps furnished with a 2 1 2 to 3 1 2 thread chamfer NPT threads require