F Series Softride Add-A-Leaf 73-97 F Series Rear Lift Height 1.5-2 Inch w/Tie Bolts Pair Skyjacker Suspension - Arms & Links & Track Bars - Control Arm Drop Kit See RJ-520201-101 for arm hardware

See RJ-520201-101 for arm hardware kit

Using the EAS Temperature Sensor you can monitor Transmission Temp

Compliment your 08-10 Ford F-250/350 Foots aggressive

6 x 135 bolt pattern

417 inch to the lifter valley cover flange at the engine block front flange Cast aluminum construction - great manifold for centrifugal blower

F Series Softride Add-A-Leaf 73-97 F Series Rear Lift Height 1.5-2 Inch w/Tie Bolts Pair Skyjacker Suspension - Arms & Links & Track Bars - Control Arm Drop Kit See RJ-520201-101 for arm hardwareSoftride Add a leafs use only American steel and are shot peened with hard steel pellets at very high velocities. This shot peening compresses the surface of the steel thereby increasing the tensile strength of the leaf. Without this shot peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the leaf. The Skyjacker add a leafs are pre drilled for the center pin. Pin location varies with each